by International Track Systems, Inc.
221 E. Cherry Street • New Castle, PA 16102
Phone: 724-658-5970 • Fax: 724-658-5975
Email: info@railseal.com
Demonstration of Rail Seal for Grade Crossings

HOME  | ABOUT ITS | RAIL SEAL FOR GRADE CROSSINGS | RAIL SEAL FOR TRANSITS | CLAMPS AND TOOLS | TECHNICAL DATA | CONTACT

Technical Data Sheet for EPDM Rubber Rail Seals

Rail Seal Application: Used in grade crossing and industrial applications to reduce wear on the crossing and make rail maintenance easier. This Rail Seal can be used in concrete or asphalt crossings.

Rail Seal Material: EPDM Rubber Black.

Rail Seal Production: All Rail Seals produced by ITS are extruded and steam cured using 100% virgin material. All material is produced under RMA Class III tolerance schedules.

Rubber Rail Seal Features:

  • Reduces impact at grade crossings
  • Reduces ground-borne vibration
  • EPDM Rubber weathers well for a long-lasting Rail Seal
  • QuikCam Clamps allow for fast and easy installation
  • 100% Quality guarantee

Service: Custom sizes are available. Special electrically isolating rail seals and electrically isolating rail boot is available upon request.

Special Notes: 85RE, 90RE, 100RE, 105 Dudley, 105 Crane, 115RE, 132RE, 136RE, 141RE are standard sizes.

Mechanical Properties Typical Value
Specific Gravity ASTM D6111-97 1.27
Durometer 75 Shore A
Tensile Strength 1000 psi min
Modulus at 200% Strain 750 psi
Modulus at 300% Strain 950 psi
Modulus at Break 350%

HOME | ABOUT ITS | RAIL SEAL FOR GRADE CROSSINGS | RAIL SEAL FOR TRANSITS | CLAMPS AND TOOLS | TECHNICAL DATA | CONTACT

221 E. Cherry Street  |  New Castle, PA 16102  |  Phone: 724-658-5970  |  Fax: 724-658-5975  |  Email: info@railseal.com

 
© 2010 International Track Systems, Incorporated
All RIghts Reserved